Samsung FRP Tool v2.0 EDL Mode + Loader + Testpoint Easy FRP Bypass Tool

 Samsung FRP Tool v2.0 EDL Mode (all qualcomm based smartphone Samsung)

Samsung FRP Tool v2.0 EDL Mode is a small tool for Windows computers. it is allowed users to remove Samsung qualcomm based chipset frp in an EDL mode. the tool is allowed you to easily remove FRP with the test point method. you can also check the Test point of the Samsung device and easily boot your Samsung device into EDL mode.

Features Samsung FRP Tool:

• Scan ports

It is allowed you to check a device booted successfully or not in an EDL mode.

• Select  MBN file manual

It is allowed you to select an MBN file that helps you to execute FRP remove operation with the device.

• Start Remove FRP

It is the final setup in here you can execute or start the FRP Remove Process single click only.

How To Use?

1. First, you need to download the zip file from the below link
2. Next, you can unzip all files at c: drive it's very important
3. Next, open the folder which you have to extract all files
4. Run the "SAMSUNG FRP TOOL.exe"
   
5. Next, you can install all drivers if you already installed skip this step
6. Connect the phone and try to do any function
7. Enjoy !!!

 

File Download:

File Name:  Samsung FRP Tool v2.0 EDL Mode FOLLOW ON INSTAGRAM: HEREFile Size: 13.4 MB

MIRROR:: Google Drive | MEGA | TERA BOX | More Link

README:

Compatibility: The tool runs perfectly on Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, and Windows 10 (32 bit and 64 bit).

Take a Backup: If you are willing to try the above tool, then please take a backup of your personal data from your Android Smartphone or Tablet. As flashing any Firmware or recovery may brick the device.

Credits:  Samsung FRP Tool is created and distributed by the developer. So, full credits go to the developer for sharing the tool for free.