DkRamdisk old machine free winding activation tool, supports iOS9.3.5~10.3.3

DkRamdisk iCloud Bypass Without Jailbreak From iOS 5.0 to 10.3.3, iPhone 4S Supported

DkRamdisk is a tool that supports bypassing the activation interface for older Apple devices. From iOS5.0 to 10.3.3, all versions support bypass activation and support Apple 32-bit devices. Currently, there is only a MacOS Apple system version. Using this tool, no jailbreak is required, it can be used directly. This tool is free, does not require registration, and does not require activation.

Supported models:

iPhone4, 4S, 5, 5C

iPad2, iPad3, iPad4

iPad mini1

iPod5

Supported iOS versions iOS 5.0, 6, 7, 8, 9, 10.3.3 , all versions within this range are supported.

Features DkRamdisk:

DkRamdisk is a simple script tool developed by Xuan Ye, and it took a lot of time to plan this tool. It took about a week to complete the entire development and testing process. Some of the files inside are transplanted with Appletech752's Sliver tool. Many friends who have used Sliver know that this is free software. It is mainly used to bypass the activation lock of old devices, and it can be used without jailbreaking, which is very convenient. However, Sliver also has some shortcomings. It is not easy to install dependent plug-ins, and the success rate is relatively low.

The purpose of DkRamdisk development is for efficient and fast operation, no need to install dependent plug-ins, faster response speed, and a better success rate. The best operating environment for macOS is 10.15.7. Version 10.13.6, which is too low, or version 12.3, which is too high, will not run friendly.

Special note: If it is iPhone4S, iPad2, iPad3, or iPad mini1 generation bypass activation, it needs the support of the A5 development board, and it is necessary. The A5 development board is shown below. If you don't have an Arduino development board, you can scan the QR code on the right to purchase it.

Special note: If it is iPhone4S, iPad2, iPad3, or iPad mini1 generation bypass activation, it needs the support of the A5 development board, and it is necessary. The A5 development board is shown below. If you don't have an Arduino development board, you can Buy it From Here:: LINK

What features are supported by bypass activation devices?

You can restart and shut down normally, and you can log in to the App Store to download the purchased software.

DkRamdisk tutorial

1. Download the above tool and extract the tool to the desktop.
2. Open the terminal on the computer, enter chmod +x space and drag the DkRamdisk in the DkRamdisk folder to the terminal, then press Enter to get the running permission.
3. Right-click to open DkRamdisk and run the tool automatically.

4. Note: 

If you want to bypass iPhone5, iPhone5C, and iPad4, you need to use Aisi to flash iOS 10.3.3. When the flashing is over, enter DFU mode immediately, and then continue with the next steps.

If it is iPhone4, iPhone5, or 5C, just put the device into DFU mode ( note that it is DFU mode, the screen is black at this time. If it is a computer connected to the data cable screen, it is recovery mode. ).

If it is iPad2, iPad3, iPad mini1 generation, or iPhone4S, after entering DFU mode, disconnect from the computer, then connect to the USB port of the Arduino development board, and then connect the development board to the computer. The LED light will light up three times first, and after 10 seconds, the LED light will be always on, indicating that it has successfully entered the PwneDFU mode.

5. Select and input the number 1 in the terminal to start the automatic booting of the device and enter the PwneDFU mode. If successful, it will automatically enter the next step and start loading data; if this step fails, it will automatically end. You will need to re-enter DFU mode and restart the boot.

6. When the tool prompts to enter the PwnDFU mode successfully, it will start to automatically load the data. During the process, the screen of the device will turn green, and wait patiently for the completion.

7. After the device is successfully booted, enter the number 2 to start mounting the partition. Wait for the completion prompt.

8. Enter the number 3 to start the game console bypassing the activation lock.

9. Finally, the bypass is completed and the device restarts automatically! After the device restarts, you can see that you can enter the desktop.

1. Add factory activation function.

Warning: This software is only for personal use in education, research, and testing. Unless you are a legally authorized user of the device, illegal use of this tool on other people's devices is prohibited. We take no legal responsibility for everything you do with this tool, for informational purposes only. In the event of a violation, all information will be deleted immediately.

Download Link: DkRamdisk Tool FREE LINK Direct - 201.4 MB