SAMSUNG A125U - U3 - OS11 Scatter Firmware Download

SAMSUNG A125U - U3 - OS11 Scatter Firmware 

Mediatek Scatter Firmware File is a .txt file containing all details of a Mediatek device partition. we can use a scatter file with any supported tool to write or Read a Single or complete device Partition.

Why We Need Stock Firmware?

• to downgrade a Phone
• to upgrade a Phone
• Fix some Serious Issues within a phone
• Remove FRP, Pattern, and Pin lock
• fix boot loop and software issues on the Phone
• completely Re-Installation of board software

Pre-Requirement’s

• backup NVRAM
• first, make a complete backup of your Personal data (if Possible)
• charge the device at least 50% to prevent accidental shut down during the process

Download Links:

• VCOM Driver: Download
• SP Flash tool V5.2: Download
• MCT Auth Bypass Tool V4: Download
• LibUSB Driver: Download
• Firmware Samsung SM-A125F - U3 -OS11 Scatter: Download

How to Flash Samsung SM-A125F Via SP Flash tool:

• Extract Downloaded firmware.
• Install the Mediatek VCOM driver on Your computer.
• Download & extract smartphone Flash tools on your computer
• from the flash tool folder Run flash_tool.exe

• Go to the Download tab Click Scatter and load the scatter file from the ROM folder

• Select Download only. Click Download & connect You switched off the Phone to a computer by Pressing the volume up & down key (in switch off Mod)

• flashing Process Started. once done, unplug the device & switch it ON

Note: if there is no USB device then you have to check for a USB driver or try test Point

TEST POINT