Translate

[Solution] Lava V62 Benco AE9150 Frp Lock Remove File No Box No Dongle [FREE]

 [Solution] Lava V62 Benco AE9150 Frp Lock Remove File No Box No Dongle [FREE]


To bypass Factory Reset Protection (FRP) on a Lava V62 Benco AE9150 mobile device using SPD Flash Tool and a .pac FRP file, you can follow these steps:

  1. Download and install the latest version of the SPD Flash Tool on your computer. [HERE]

  2. Download the .pac FRP file for your Lava V62 Benco AE9150 device. [CLICK HERE]

  3. Extract the .pac FRP file to a folder on your computer.

  4. Open SPD Flash Tool and click on the "Load Packet" button.

  5. Select the .pac FRP file from the folder where you extracted it.

  6. Connect your Lava V62 Benco AE9150 device to the computer using a USB cable.

  7. Put the device into Download Mode by following the instructions provided by the tool.

  8. Click on the "Start" button to begin flashing the .pac FRP file to the device.

  9. Wait for the flashing process to complete.

  10. Disconnect the device from the computer and restart it. The FRP lock should now be bypassed and you should be able to access the device without entering a Google account.

Note: The boot key is Lava V62 benco AE9150 is a "Both volume button VOL + and VOL -" insert the USB cable and ensure you have downloaded and installed the latest version of SPD Drivers on your computer. if any issues you can contact me on my WhatsApp number +918668709402.

Keep in mind that this process may not work for all devices, and it may erase all data on the device. You should also be aware that bypassing FRP may be a violation of the device's terms of service and may void the device's warranty. I recommend proceeding with caution and only using this method if you are comfortable with the risks involved.

Post a Comment

0 Comments