Download Nothing Phone Flash Tool [Latest Version]

Nothing Phone Flash Tool -2025

The Nothing Flash Tool is an official utility developed by Nothing Technology Limited for installing stock firmware (.ntpi files) on Nothing devices. This tool is essential for upgrading the operating system, enhancing performance, applying security updates, introducing new features, and resolving software issues.

Key Features of the Nothing Flash Tool:

Flash Firmware: Install stock firmware to upgrade the OS or fix software-related problems.

Readback Partition: Access a backup of the operating system for diagnostics and recovery.

Flash Partitions: Update specific partitions, such as the preloader or user data, for advanced customization.

Check Device Status: Retrieve information like SKU and bootloader status to ensure compatibility and readiness for flashing. 

Compatibility

The Nothing Flash Tool has been tested and confirmed to work on the following devices:

• Nothing Phone 1
  • Model: 20111V
• Nothing Phone 2
  • Model: 22111V
• Nothing Phone 2A
  • Model: 23111V
• Nothing Phone 2A Plus
  • Model: 23113V
• CMF Phone 1
  • Model: 23114V

How to use

Before proceeding, ensure you've backed up all important data, as the flashing process will erase all personal information on the device.

1. Download the Nothing Flash Tool:

   • Obtain the latest version from the official source and you can use the below link.

2. Install Necessary Drivers:

   • Install the required drivers to ensure your device communicates properly with your computer.

3. Prepare the Firmware File:

   • Download the appropriate firmware (.ntpi file) for your specific Nothing device model.
   • Move the .ntpi firmware file into the same folder as the Nothing Flash Tool executable to prevent errors like "Config Files Parsing Fail."

4. Launch the Nothing Flash Tool:

   • Run the Nothing Flash Tool executable on your computer.

5. Connect Your Device:

   • Power off your Nothing device.
   • Press and hold the Volume Up and Volume Down buttons simultaneously.
   • While holding the buttons, connect the device to your computer using a USB cable.
   • Release the buttons once the device is recognized by the tool.

6. Flash the Firmware:

   • In the Nothing Flash Tool interface, select the connected device.
   • Click on the "Flash" button to begin the firmware installation process.
   • Wait for the process to complete; do not disconnect the device during flashing.

7. Reboot the Device:

   • Once the flashing process is finished, the device will reboot automatically into the new firmware.

Download Link

• Nothing Flash Tool V2.12: Download - Latest

"mvikrant97" is the user who created the tool and uploaded it to the XDA platform Developer's forum. it is very helpful for all users who have used the nothing phone.