OPPO REALME SPD NO NEED AUTH TOOL

OPPO REALME SPD NO NEED AUTH TOOL

Software Download (SWD) for SPD Phones is a new crack flash tool that is discussed in this post. It enables users to flash or install the firmware (ROM) without a username, password, or key for devices with Spreadtrum/Unisoc Chipsets.

 

Features of Transsion Software Download Tool

• Portable Application
• Flash Firmware
• Supports Multiple Chipsets
• Support Multiple File Formats

How to use it?

1. Download and install Spreadtrum/Unisoc Driver on your computer (if not already installed).
2. Download Stock Firmware (scatter or .pac or .xml based) of your Mobile Device and extract it on your computer.
3. Extract the Software Download Tool on your computer.
4. Open SWD_UserRomUpgrade.exe to Launch the Tool.
5. Click on the Settings.
6. Click on the Load button.
7. Locate the Stock Firmware and Click on the Open button.
8. Click on the Confirm button.
9. Click on the Start button.
10. Power off your Mobile Device > Press and Hold Volume UP and Down and Connect it to the Computer using the USB Cable.
11. Once the Device is detected by the tool, leave the volume keys.
12. The Flashing or installation process will start automatically and may take 5-10 minutes to complete.
13. Once the flashing or installation process is completed, you will be able to see the Green PASS message on the tool.
14. Close the Tool on the computer Disconnect the device and Restart it.

Download Link

• OPPO Realme SPD/Unisoc Flash Crack Tool || Download [15.4 MB]