Redmi 10c (Fog) Hang on Logo Fix Using Fastboot Mode (2023)

Redmi 10c (Fog) Hang on Logo Fix Using Fastboot Mode

Step-by-step process:

Step 1: Download Necessary Files

Ensure you have the required files downloaded before proceeding. This includes the small file provided for fixing the hang on logo issue and the Mi Flash Tool. 

Link:- https://mega.nz/file/pzpmCLab#tOI61nBpV-jXZMh-YJebwPjdIhLt-pBmJ7yC9RgHnHo

Step 2: Unlock Bootloader (If Required)

If your device's bootloader is locked, you may need to unlock it before proceeding with the fix. Follow the official Xiaomi bootloader unlocking procedure, which typically involves obtaining an unlock code and using Mi Unlock Tool.

Step 3: Boot into Fastboot Mode

Power off your Redmi 10c completely. Press and hold the volume down button and the power button simultaneously until the fastboot logo appears on the screen.

Step 4: Connect Your Device to PC

Connect your Redmi 10c to your PC using a USB cable while in fastboot mode.

Step 5: Use Mi Flash Tool

Launch the Mi Flash Tool on your PC. Select the appropriate ROM folder and ensure that your device is recognized by the tool.

Step 6: Flash or Rewrite Boot Partition

Locate the small file you downloaded for fixing the hang on logo issue. This file is designed to flash or rewrite the boot partition. Follow the on-screen instructions in the Mi Flash Tool to initiate the process.

Step 7: Wait for Completion

Allow the flashing process to complete. Do not disconnect your device during this time. Once finished, your Redmi 10c should automatically reboot.

Step 8: Verify Fix

After the reboot, check if the hang on logo issue is resolved. Your Redmi 10c should now boot up without any problems.

By following these steps and using the recommended Mi Flash Tool, you can easily fix the hang on logo issue on your Redmi 10c (Fog). Always exercise caution when flashing files and ensure compatibility with your device model.