Medusa PRO Software Latest Version [2024]

Medusa PRO Software v2.2.5.5 is out!

The new version of Medusa PRO Software v2.2.5.5 is now available! This update introduces support for UFS3.1 and UFS4.0 low voltage modes, enhances Qualcomm 9008 connections, and fixes issues with parsing flashfile.xml during Motorola device repairs. Improvements have also been made to the ISP connection in PWM Gear 3-4 mode, along with other minor enhancements.

New Version: Medusa PRO Software v2.2.5.5 is released!

New Features:

• Added UFS3.1 and UFS4.0 low voltage modes.
• Improved connection via Qualcomm 9008.
• Fixed parsing flashfile.xml in "Repair Motorola devices using factory files" operation.
• Enhanced ISP connection in PWM Gear 3-4 mode.
• Other minor improvements.

More Information: Available at www.medusabox.com.

Download: Latest software version available in the Support Area or via OTA Software Update:

• Path: /medusa_pro/RELEASE SOFTWARE/Medusa Pro_2.2.5.5.exe
• Path: /SOFTWARE/Octoplus Pro JTAG/RELEASE SOFTWARE/Medusa Pro_2.2.5.5.exe

Direct mega link click here

Features Medusa Pro:

• Read Boot/Flash
• Write Boot/Flash
• Erase Boot/Flash
• Repair Boot/Flash
• Unlock and Repair IMEI* (SONY and HTC only via Testpoint or JTAG connection)

Supported CPUs:

• Broadcom BCM2133, BCM2155, BCM21654
• HiSilicon Hi6731
• Marvell PXA270, PXA310
• Qualcomm APQ8060, APQ8064, APQ8064T, MDM6270, MDM8200A, MSM6280, MSM6280A, MSM6275, MSM6281, MSM6246, MSM6245, MSM6260, MSM6800, MSM6290, MSM6250, MSM6250A, MSM7200, MSM7200A, MSM7200B, MSM7201A, MSM7201B, MSM7227, MSM7227A, MSM7227T, MSM7225, MSM7225A, MSM7230, MSM7230T, MSM7625A, MSM8255, MSM8255T, MSM8227, MSM8230, MSM8260, MSM8655, MSM8660, MSM8930, MSM8930AB, MSM8960, QSC6270, QSC6270 (OneNAND), QSD8250, QSD8650
• ST-Ericsson NovaThor U8500
• Samsung S3C6410, S5P6442, S5PC110 Cortex A8, S5PC210, S5PV310 Cortex (Exynos4210)
• Texas Instruments OMAP850, OMAP3430, OMAP3630

Step-by-step guide for using the Medusa PRO Software v2.2.5.5:

1. Download and Install: Obtain the latest version of Medusa PRO Software v2.2.5.5 from the Support Area or use the OTA Software Update.

2. New Features Overview:

   • UFS3.1 and UFS4.0 low voltage modes are now supported.
   • Improved connection via Qualcomm 9008.
   • Fixed issues with parsing flashfile.xml for Motorola device repairs.
   • Enhanced ISP connection in PWM Gear 3-4 mode.

3. Connecting the Device:

   • Physically connect your device to the appropriate interface (USB, eMMC, UFS, or NAND).
   • Select the correct interface in the software.
   • Configure the interface settings, such as voltage and bus mode, as required.

4. Device Initialization:

   • Click "Connect" to initialize the device.
   • Review the log to confirm successful initialization and note any device information displayed.

5. Perform Operations:

   • Choose the desired operation: read, write, erase, repair, or unlock IMEI.
   • If using factory firmware, select the appropriate file and proceed with the operation.
   • For UFS devices, configure gears and partition the UFS storage if necessary.

6. Completion:

   • Monitor the progress and log to ensure the operation is completed successfully.
   • Disconnect the device once the process is finished.