Download Orange State Fixer: How to Fix Orange State on MTK Phones 2024

Download Orange State Fixer How to Fix Orange State

If you have an MTK phone and you have unlocked the bootloader or flashed the TWRP recovery, you may encounter the Orange State problem. This problem prevents your phone from booting normally and shows a warning message on the screen. To fix this problem, you need to use the Orange State Fixer script, which can patch the mtk-msdc.0 file and allow your phone to boot.

In this article, we will show you how to download and use the Orange State Fixer script for MTK phones. This script has been tested on various devices running Android 8 to 11, such as Doogee Y8, Huawei Y5 2018, Oukitel C11 Pro, and more. You can check the full list of tested devices below.

Prerequisites

Before you proceed, make sure you have the following:

- A backup of your phone's data. This will help you restore your phone if anything goes wrong.

- A battery level of at least 50%. This will prevent accidental shutdown during the flashing process.

- A TWRP recovery installed on your phone. You can find the TWRP recovery for your device [here](https://twrp.me/Devices/).

- A USB cable or an SD card to transfer the Orange State Fixer script to your phone.

Downloads

You can download the Orange State Fixer script from the link below. This script is compatible with Android 8 to 11 and has been tested on various MTK phones.

- [Orange State Fixer script](https://www.mediafire.com/file/xsjm0xy5jt0xc39/orange_state_disabler_Mediatek-android11_ROMProvider.COM.zip/file)

Tested Devices

The Orange State Fixer script has been tested on the following MTK devices:

- Doogee Y8 [arm64-v8a, MT6739, Android 9.0]

- Huawei Y5 2018 [DRA-L21, MT6739]

- Oukitel C11 Pro [arm64, Android 8.1]

- Alcatel 1x

- Tecno 1s pro [arm, MT6739, Android 8.1]

- UMIDIGI A3 PRO

- Dexp t155 [arm32, Android 8.1]

- Vernee t3 pro

- Ulefone s9 pro [arm64-v8a, MT6739]

- Umidigi A3

- Homtom s99 (versions below 0.3 do not work !!!)

- jingo startlte

- Ulefone S10 Pro

- DEXP AS260

- Santin M4-55 [Android 7, MTK6737]

How to Use Orange State Fixer

To use the Orange State Fixer script, follow these steps:

1. Download the Orange State Fixer script from the link above and transfer it to your phone's storage using a USB cable or an SD card.

2. Reboot your phone into TWRP recovery mode. To do this, power off your phone and then press and hold the power and volume up buttons together until you see the TWRP logo.

3. In TWRP, tap on Backup and make a backup of your phone's system, data, and boot partitions. This will help you restore your phone if anything goes wrong.

4. After the backup is done, go back to the main menu and tap on Install. Navigate to the location where you saved the Orange State Fixer script and select it. Swipe to confirm the flash.

5. Once the flash is complete, tap on Reboot System. Your phone should boot normally without the Orange State warning.