The system has been destroyed (ENG ROM Mode) - All Xiaomi/Poco Models Supported

The system has been destroyed (ENG ROM Mode) - All Xiaomi/Poco Models Supported

Hello friends today in this post i have solution for fixed the "The system has been destroyed" problem on all xiaomi or poco smartphones. once you have power on your device this error come and your device is useless in this condition first you have realize flash the device yes this is solution for normal phone. but if you have install a ENG ROM and this error is appear int this situation you can easily fixed the problem. please follow some basic steps and give new life of your xiaomi or poco smartphone.

How to Fix "The System Has Been Destroyed" Error on Xiaomi/Poco Smartphones

Prerequisites

• Ensure your device is running an ENG ROM. If you are using the official firmware, you need to first flash the ENG ROM.
• Download and install all necessary fastboot drivers.
• Download the tool from the provided link.

Steps to Fix the Error

1. Confirm ENG ROM Installation

   • Verify that your device has the ENG ROM installed. If not, flash the ENG ROM first.

2. Power Off Your Device

   • Completely turn off your device.

3. Download the Tool

   • Download the fix tool from the click here.

4. Install Fastboot Drivers

   • Ensure that all required fastboot drivers are installed on your computer.

5. Boot into Fastboot Mode

   • Press and hold the Volume Down and Power buttons simultaneously until the fastboot screen appears.

6. Run the Tool

   • Locate the downloaded tool named "The system has been destroyed (ENG ROM Mode).bat".
   • Double-click on the tool to run it.

7. Wait for the Process to Complete

   • The tool will take some time to run. Be patient as it works through the process.

8. Reboot Your Device

   • Once the tool completes its operation, your device will automatically reboot.

9. Problem Fixed

   • After the reboot, the "The system has been destroyed" error should be resolved.

10. Enjoy Your Device

• Your Xiaomi or Poco smartphone should now be working properly without the error.