IMEI Repair on Huawei Qualcomm Devices with EMUI14

Complete Guide to IMEI Repair on Huawei Qualcomm Devices with EMUI14

In case software problems happen, Huawei or Honor devices with Qualcomm processors may require IMEI repair. The DTpro team has provided this guide, which defines the two-stage process for fixing such devices' networks and IMEIs.

Step 1: Preparation

1.1 Write the Bootloader Image

1. Run Qualcomm Module: Begin by launching the Qualcomm Module software.
   
   
   
2. Brand Selection: In the brand option, select "Huawei and Honor Devices" and ensure e-Token authentication is active.
   
   
   
3. Model Selection: In the Xboot section, select the model of your device.
   
   
   
4. Type Option: Choose the "Encrypted!" type option.
   
   
   
5. Select DT-File: Click on the "Select DT-File" option and load the Bootloaderimage file for your specific model.
   
   
   
   
   
6. Device Connection: Connect your device in Qualcomm Mode [EDL].
   
   
   
7. Write Bootloader Image: Press the Write button to write the loaded Bootloader image file to the device.
   

Step 2: Write IMEIs and Turn on Phone

1. Enter Manufacturer Mode: On your phone, open the dial pad and type ##2846579##. Navigate to "Project Menu" > "Background Settings" > "USB Ports Settings" > "Manufacture Mode".
2. Driver Installation: Connect your phone to the PC and install the necessary drivers. If you do not have a specific driver pack, install HiSuite and Honor Suite software.
   
   
   
3. Check Connection: Ensure your device is connected in Manufacturer Mode and that the drivers are installed correctly.
   
   
   
4. Qualcomm Module Setup: In the Qualcomm Module, select the DBAdapter Reserved Interface port.
   
   
   
5. Special Task Selection: Press Special Task and choose the IMEI repair option.
   
   
   
6. Input New IMEIs: Enter the new IMEI numbers when prompted and press OK.
   
   
   
   
   
7. Completion: Wait for the operation to finish, confirming that the IMEIs have been successfully repaired.
   

Repair Network

Certain models require a network repair operation after IMEI repair due to device security or firmware version. The affected models include:

• Huawei Nova 9 SE
• Huawei Nova Y90
• Huawei Nova 11i
• Honor X7
• Honor X8 (some firmware)
• Honor 50 lite (some firmwares)
• Honor Magic 5 lite
• Huawei Enjoy 60 Pro

Network Repair Procedure

1. Select Model: In the list option of the Qualcomm Module, select your device model for network repair.
   
   
   
2. Repair Network: Press the Repair Network button.
   
   
   
3. Operation Completion: Wait for the operation to finish and restart your device.
   
   
   

Note: Some devices may require a factory reset after completing the repair process.

By following these steps, you can successfully repair the IMEI and network issues on your Huawei or Honor devices equipped with Qualcomm processors.