Redmi A3 Scatter File for FRP and Mi Account Removal

Redmi A3 Scatter File for FRP and Mi Account Removal

With the Redmi A3 scatter file, you can easily remove both the FRP (Google lock) and the Mi account. You will need some files, which I will provide, and remember to input custom addresses to successfully remove both locks without errors. You can use the SP Flash Tool, which is specially designed for MediaTek devices.

Download Link

• https://mega.nz/file/wL8RTKrI#29H4jskhvC7k2UVRRnFvK6qHvb9VeCzMwEedkKFUOnI

Steps

1. Download the Redmi A3 scatter file

2. Download and install the SP Flash Tool

3. Install the necessary drivers if you haven’t already; otherwise, your device won’t connect to the PC.

4. Open the SP Flash Tool and load the scatter file.

5. Go to the Format tab and click on the manual address. Enter the following addresses:

   For Mi Account Removal:

   • Begin Address [HEX]: 0xc800000
   • Format Length [HEX]: 0x3000000

   For FRP Removal:

   • Begin Address [HEX]: 0x1808000
   • Format Length [HEX]: 0x100000

6. Connect your device to the PC in switch-off mode.

7. The operation will complete in a few seconds using the addresses you filled in.

By following these steps, you will successfully remove the FRP and Mi account locks from your Redmi A3 using the provided scatter file and SP Flash Tool.