Translate

VIVO Y15 (1901) FRP and Safe Format using UMT MediaTek Tool

In this post, the latest solution for vivo Y15 (1901) will be the MediaTek processor. The problem is that the lock is forgotten by the customer, now once the customer handover the mobile for unlock I use many free tools first but all tools require the test point for boot into preloader mode (PL), now I download the UMT tool Mediatek module and remove the FRP + Lock in a single click only without any other tool or test point.


Here is a step-by-step guide to bypass FRP and perform a safe format on the VIVO Y15 using the UMT MediaTek Tool:

Requirements:

  • VIVO Y15 device
  • UMT UltimateMTK Tool (version 1.2 or above)
  • Compatible drivers
  • UMT dongle

Steps:

  1. Download and Install Drivers:

    • Ensure you have the necessary drivers installed on your PC for the VIVO Y15. You can usually find these on the VIVO official website or bundled with the UMT tool.
  2. Download and Install UMT UltimateMTK Tool:

    • Download the UMT UltimateMTK Tool from a trusted source.
    • Install the tool on your PC by running the setup file.
  3. Connect UMT Dongle to PC:

    • Plug the UMT dongle into a USB port on your PC.
  4. Open UMT MTK Module:

    • Locate the UMT MTK Module shortcut on your desktop and open it.
  5. Select the Correct Exploit:

    • In the UMT MTK Module, select "PL EXPLOIT" from the available options.
    • From the dropdown menu, select "VIVO V1".
  6. Navigate to the Service Tab:

    • Go to the "Service Tab" within the UMT MTK Module interface.
  7. Choose Safe Format + FRP:

    • In the Service Tab, locate the Format function options.
    • Select "Safe Format + FRP".
  8. Execute the Operation:

    • Click on the "Execute" button to begin the process.
  9. Connect Your Device:

    • Connect your VIVO Y15 to the computer without pressing any buttons on the device.
    • The tool will automatically detect your device and begin the process.
  10. Wait for Completion:

    • Once the device is detected, the tool will remove the lock and FRP.
    • Wait for the process to complete.
  11. Restart and Setup Device:

    • After the process finishes, disconnect your device from the computer.
    • Restart your VIVO Y15 and set it up as a new device.

Following these steps will allow you to bypass the FRP and perform a safe format on your VIVO Y15 using the UMT MediaTek Tool. Always ensure you are using these tools in compliance with local laws and regulations.

إرسال تعليق

0 تعليقات