VIVO Y17s Preloader and Scatter File Free Download

VIVO Y17s Preloader and Scatter File Free Download

VIVO Y17s is a MediaTek device Preloader file is allowed you to flash and unlock your device by any tool. the file is tested and check on many devices, today I have a link for download the file and fixed your device and recover from FRP, Userlock and flash device.

Download Link

• VIVO Y17s Preloader + Scatter File: Download

Also read :OPPO A18 CPH2591 Download Not Complete 100% After Flash Format [FIX]

Flashing VIVO Y17s Using SP Flash Tool

1. Download and Install Mediatek Driver Autoinstaller

   • If Mediatek Driver is already installed on your computer, skip this step.
   • Otherwise, download and install the driver.

2. Download Stock ROM

   • Download the Stock ROM (firmware) for your Mediatek Device.
   • Extract the downloaded firmware on your computer.

3. Download and Extract SP Flash Tool

   • Download SP Flash Tool and extract it on your computer.
   • You should see the following files after extraction:
     • SP Flash Tool Extracted Files
4. Also read :Xiaomi 11T (Agate) GLOBAL MIUI V13.0.2 [Unlock Bootloader](Without Waiting)[Without any Tools Just Flashing]

   Launch SP Flash Tool

   • Open flash_tool.exe to launch the tool.

5. Load Scatter File

   • Click on the Scatter-Loading Button.
   • Locate and select the Scatter File from the firmware folder.
   • Click the Open button.

6. Start Flashing Process

   • Click on the Download Button to begin the flashing process.

7. Connect Device to Computer

   • Connect your Mediatek Device to the computer using a USB cable (ensure the device is powered off).
   • After connecting, press the Volume Down or Volume Up key for the tool to detect the device.

8. Flashing Process

   • Once the computer detects your device, the flashing process will start automatically.
9. Also read :Samsung A037M U7 OS13 Scatter Firmware [Dead Boot Repair]

   Completion

   • A Green Ring will appear at the end of the flashing process.
   • Close SP Flash Tool and disconnect the device.

10. Success

• You have successfully flashed or installed Stock Firmware on your Mediatek device.

Removing FRP (Factory Reset Protection) on VIVO Y17s

1. Open SP Flash Tool

   • Launch the SP Flash Tool on your computer.

2. Load Scatter File

   • Load the scatter file for your device.
3. Also read :Tecno Spark Go 2023 BF7 Dead Boot Repair using CM2MT2 Tool

   Bypass the Auth

   • Bypass the authorization requirement.

4. Go to Format Tab

   • Select the Format tab in SP Flash Tool.

5. Manual Format Flash

   • Choose the "Manual Format Flash" option.

6. Set Format Addresses

   • Enter the following addresses:
     • Begin Address [HEX]: 0x7508000
     • Format Length [HEX]: 0x100000

7. Start Formatting

• Click on the Start button to begin the formatting process.