Translate

Free Jailbreak and Tethered Bypass for iOS 12.x - 17.x

Free Jailbreak and Tethered Bypass for iOS 12.x - 17.x

This guide provides a free solution to jailbreak and bypass the hello screen on iOS 12.x to 17.x devices. Note that this method is tethered only, meaning you must re-jailbreak and re-bypass your device every time it reboots.


Tethered vs. Untethered


Tethered: When your device reboots, you must re-jailbreak and re-bypass it using a computer. Otherwise, you won't be able to use the device.

Untethered: When your device reboots, the jailbreak and bypass persist, allowing you to use the device as before without needing to reapply the jailbreak.


Steps to Jailbreak and Bypass


Step 1: Download the Jailbreak Tool

  1. Download the jailbreak tool "iFrpRa1n V1.3" (link provided at the end of the post).
  2. Run "iFrpRa1n V1.3" as an administrator.

Step 2: Preparation

  1. Ensure that iTunes is installed on your PC.
  2. Connect your iOS device to the PC in Hello Screen mode.

Step 3: Register ECID

  1. Once connected, the tool will display your device's model, mode, and ECID number. Copy the ECID number.
  2. Click on the blue text "Free ECID Register" within the tool.

  3. You will be redirected to a website. Enter the copied ECID number and click "Submit."


  4. A message saying "Congratulations, you have successfully registered your ECID" will appear. This means you are ready to jailbreak.

Step 4: Jailbreak Process

  1. Restart the jailbreak tool and select the "Rootfull" option, then click "Start."

  2. Follow the on-screen instructions to press specific buttons.

  3. Do not press any buttons when the message "Device entered DFU mode successfully" appears.

  4. The jailbreak process will start automatically. Do not disconnect your device until you see "Jailbreak Done."

Step 5: Tethered Bypass

  1. Open the "TetheredBypass_FRPFILE" tool as an administrator.

  2. Connect your device in Hello Screen mode.
  3. The tool will display various details about your device. Ensure "Jailbroken" shows "YES." If it shows "NO," restart the tool.

  4. Click the "Activate" button in the tool and wait for the process to complete.

  5. Once "Factory/Activated" appears, you have successfully bypassed the device.

Download Link



Password: frpfile

Conclusion

Now you can follow the basic setup steps on your mobile device. Remember, if you reboot your device, you will need to repeat the jailbreak and bypass steps.

Enjoy your newly jailbroken and bypassed device!

Post a Comment

0 Comments