Nobby 220 Flash File Free Download SPD

Nobby 220 Flash File Free Download SPD

The Nobby 220 is a small phone with a 2.4-inch display, 0.3 MP camera, and 1000 mAh battery that meets all the requirements for basic communication. It allows users to manage multiple numbers with flexibility as it supports dual SIM cards. Because of its physical keypad, the phone is easy to use for people who are not fond of touchscreens but rather tactile feedback. To further improve its usefulness for storing contacts, messages, and media, the Nobby 220 also allows expandable storage through a microSD card, the device is an inbuilt Chipset Spreadtrum SC6531E.

Download Link

https://mega.nz/file/ZaEjDZDT#zw95RbE7f0I_PbAN03KAjFdO1NJpO62HyaAy70iXuGo

Step-by-Step Instructions for Flashing Nobby Mobile Phones

Preparation

1. Backup Data: Before flashing the device, back up or transfer important data such as contacts, photos, etc.
2. Charge the Battery: Ensure the device's battery is fully charged.

Flashing Process

1. Driver Installation:

   • Locate the folder with the driver for the device in the extracted archive.
   • Choose the appropriate driver based on your operating system: 32-bit drivers for a 32-bit OS and 64-bit drivers for a 64-bit OS.
     
     
     

2. Firmware Installation:

   • Open the folder and select the firmware file.
   • Ignore any warnings from your antivirus software.

3. Settings Configuration:

   • Click on "Settings".
   • Choose the firmware image from the downloaded archive, then click to start the flashing process.
     
     
     

4. Connect the phone to the PC:

   • Remove the battery from the phone.
   • While holding down the "Central Navigation Key", connect the phone to the PC.
   • The program will automatically start the installation.
   • Note: If the installation doesn't start, check if the driver is installed correctly. If everything is set up properly, you will see a "Passed" message at the end.
     
     
     

5. Finishing Up:

   • Disconnect the device from the computer.
   • Reinsert the battery and turn on the device.
   • The flashing process is now complete.

Follow these steps carefully to ensure a successful flashing of your Nobby mobile phone.