Translate

Flash64 New Update - V1.04.30.2025 Free Download

Flash64 New Update - V1.04.30.2025 Free Download

Flash64 is a most useful tool nowadays because it works on EMMC, a UFS-like chip for reprogramming to fix the damage and many useful functions come with this box. The software needs hardware box to connect devices otherwise, it will not work.


Key Features and Enhancements:

1. Auto LBA Skip on UFS with Secure Write-Protected Blocks

  • This feature automatically bypasses LBA errors on secure write-protected blocks, ensuring smoother operations.

2. UFS Secure Write Protection Removal (WP Remove)

  • A new advanced option allowing the removal of secure write protection from UFS storage.
  • Use this option at your own risk.
  • According to our tests, most UFS devices will experience 100% data loss, except for a few exceptions listed below:

Data Loss Risk Analysis by Brand & UFS Specification

BrandUFS SpecificationData Status after WP Remove
Samsung2.0NO Data Loss
Samsung2.1NO Data Loss
Samsung2.2NO Data Loss
Samsung3.0NO Data Loss
Samsung3.1NO Data Loss
Samsung4.0WARNING: 100% Data Loss on all LUNs! Backup required!
YMTC2.2NO Data Loss
Other Brands (SkHynix, Micron, KIOXIA, etc.)Any Version100% Data Loss on all LUNs! Backup required!

Flash64: The Fast UFS/eMMC Programmer That’s Revolutionizing Data Storage Solutions!

Unmatched Compatibility & Speed

Flash64 Ultra is designed to support a vast range of storage technologies, ensuring fast and efficient programming:

  • UFS: Full compatibility with versions 1.0 to 4.1, achieving HS-Gear speeds up to 420 MB/s.

  • eMMC: Supports versions 4.1 to 5.1, with up to 8-bit HS200 speeds of 200 MB/s.

  • Nano Memory Card (NM): Up to 4-bit 90 MB/s.

  • MicroSD: Supports SDSC, SDHC, SDXC, and SDUC up to UHS-I speeds of 104 MB/s.

Advanced Diagnostic Interfaces

Flash64 Ultra comes equipped with essential interfaces for modern electronic repairs and diagnostics:

  • RFFE, JTAG, SPI, I2C, UART – Essential for deep-level device troubleshooting.

Cutting-Edge Connectivity & User-Friendly Features

Flash64 Ultra is designed to be both high-speed and user-friendly, offering:

  • Dual USB 3.2 Gen 1 & USB 2.0 for fast and reliable data transfers.

  • Wireless BLE 5.0 & WiFi 4 for added flexibility.

  • NFC-based warranty tracking for seamless service management.

  • 1.69-inch IPS TFT LCD display for real-time progress monitoring.

  • Customizable RGB lighting to match your workspace aesthetic.

Supported Firmware/Flash File Formats

Flash64 supports a wide variety of firmware and flash file formats for direct flashing, including:

  • Binary Files
  • IMG Files
  • Samsung Tar MD5 & Tar Files
  • Qualcomm XML Files
  • MTK Scatter & MTK XML Scatter Files
  • .BAT Batch Files & .SH Shell Scripts
  • Spreadtrum (Unisoc) PAC Files
  • OnePlus OPS Files
  • ASUS RAW Files
  • Motorola Flash & Service XML Files
  • Huawei Update APP Files
  • Sony Update XML Files
  • LG KDZ Files

Unpacking & Checksum Verification Support

Flash64 can also unpack and verify checksums for the following packaged files:

  • Android payload.bin
  • Oppo OFP Files
  • OnePlus OPS Files
  • Unisoc PAC Files
  • ASUS RAW Files
  • Sony SIN & FTF Files
  • LG KDZ Files

Latest MTK Scatter File Support

Flash64 now supports the newest MTK Scatter Files with Regional Provisioning in XML format, ensuring compatibility with the latest Oppo, Vivo, and other 5G devices.


Changelog

⚡️Flash64⚡️ New Update! V1.04.30.2025

04.29.2025 - Update

  1. Fixed Android information reading for Motorola phones.
  2. Fixed eMMC FFU boot mode to prevent CID alteration.
  3. Fixed Micron UFS supply bug.
  4. Added a Delete Button for all MONDAYS from UFS:

    • Use this to fix UFS IC "slow" issues
    • Safer than UFS Provision
    • No OTP unlock required
    • Do NOT delete RPMB data
    • Do NOT erase protected areas for writing
  5. Added Delete Button for all parts of eMMC:

    • Deletes all data from eMMC
    • Resets eMMC BOOT configuration
  6. Added Samsung eMMC Firmware Support:

    • DUTB42 : KLMDG4UCTB-B041
    • 3H6CAB : KM3H6001CA-B515
    • DP68MB : KMDP60018M-B425 (by 0x9k)
    • DV6DAB : KMDV6001DA-B620 (by 0x9k)
  7. Added Generic OEM Unlock for Android:
    • May require additional steps based on brand/manufacturer.
  8. Added RPMB writing for UFS.
  9. Improved partition reader/backup file (rawprogram.xml).
  10. Added EXT_CSD as part of the eMMC partition list.
  11. Added Primary GPT Verification and Backup GPT to IC Detecting.
  12. Enhanced GPT Generation for Dimensity and Qualcomm UFS/eMMC.
  13. Auto Slot Select via flash_all.bat for Factory Firmwares from Mi.
  14. Added adjustable VCC On Delay for eMMC via Settings.ini (EmmcVccInitDelay=2000)
    • Value in milliseconds
    • Adjustable between 40 to 8000 ms
    • Flash64 New Settings Link included



File information

File Name: Flash64 New Update - V1.04.30.2025 .zip

File Size: 39.31 MB

File Type: Free

Password: No password


How to Use

  1. Download the tool by clicking the download button.
  2. Extract the downloaded file using 7-Zip or WinRAR.
  3. Enter the password when prompted (click on the password to copy).
  4. If it's a portable tool:
    • Simply run the F64_Ultra.exe file inside the extracted folder.
  5. Need to connect box:
    • Now connect the box to the computer
    • Connect the mobile to the box using ISP pinout
    • Now you can use them according to your EMMC, and UFS chip operation

Download File

 


🚨 Important Notice:

I have published software for users. Before installation, please scan it with your antivirus software. If any virus is detected, do not use it.

I am not responsible for any issues caused by using any software. If you find any software on my website that is not working, has a broken link, or any other issue, simply email me at: softwarecrackguru@gmail.com.


Post a Comment

0 Comments