Translate

Realme 10 RMX3630 Dead Boot Repair Fix ROM [Scatter Firmware]

Realme 10 RMX3630 Dead Boot Repair Fix ROM [Scatter Firmware] | IMEI Repair via Pandora Tool or DFT Tool

If your Realme 10 (Model: RMX3630) is dead after flashing or stuck in bootloop, don't worry. We now have a Dead Boot Repair Fix ROM specially created for this model, which is 100% working with Scatter Firmware. This ROM helps bring your device back to life and even supports IMEI repair using Pandora Tool or DFT Tool.


What Is This File?

This is a specially patched Dead Boot Fix ROM for Realme 10 RMX3630. It can help in:

  • Reviving dead/brick devices.
  • Fixing stuck logo/bootloop issues.
  • Restoring device partition structure.
  • Supporting IMEI restoration via tools like Pandora or DFT.

🧰 Tools Needed:

  • SP Flash Tool or Pandora Tool / DFT Tool
  • MTK USB Driver installed on your PC.
  • A good quality USB cable.
  • The scatter-based ROM (download below).
  • Pandora Tool or DFT Tool for IMEI Repair (Optional but recommended).


📥 Download Dead Boot Repair Fix ROM

🔗 Download from Google Drive


🔐 Password: HALABTECH2024


⚙️ How to Use:

🔧 For Flashing (SP Flash Tool or Pandora):

  1. Extract the downloaded zip using the password: HALABTECH2024.
  2. Open SP Flash Tool or Pandora Tool.
  3. Load the MTK Scatter file from the extracted folder.
  4. Select Download Only or Firmware Upgrade.
  5. Connect your Realme 10 (RMX3630) via USB in boot key or test point mode.
  6. Hit Download and wait until the flashing process completes.


🛠️ For IMEI Repair:

  1. After successful flashing, open Pandora Tool or DFT Tool.
  2. Connect your device in META Mode.
  3. Write the original IMEI (usually found on the box).
  4. Reboot your device.

⚠️ Important Notes:

  • This ROM is intended only for RMX3630. Do not use on other models.
  • Make sure to take a backup of your data if possible.
  • IMEI repair is only legal when restoring your device's original IMEI.
  • Always use this file at your own risk.


📌 Credits:

  • Special thanks to the HalabTech Team for providing the Dead Boot Repair file.
  • All tools and firmware are shared for educational & repair purposes only.


🚨 Important Notice:

I have published software for users. Before installation, please scan it with your antivirus software. If any virus is detected, do not use it.

I am not responsible for any issues caused by using any software. If you find any software on my website that is not working, has a broken link, or any other issue, simply email me at: softwarecrackguru@gmail.com.


Post a Comment

0 Comments